Home Products Support Service Forum Order Contact Us CoreWind Technology
The User Manul for Mini210/Tiny210SDK1/SDK2 Board
1. Quickly Start
  1.1  Getting Start for Mini210s
  1.2  Getting Start for Tiny210
  1.3  System Update for Mini210s
  1.4  System Update for Tiny210
2. System Test method
  2.1  Touchsreen
  2.2  rotating screen
  2.3  Play MP3
  2.4  Recording
  2.5  WiFi Internet
  2.6  CMOS camera
  2.7  HDMI output
  2.8  GPS Test
  2.9  Ethenet Setting
  2.10  3G Networking
  2.11  3G SMS
  2.12  Dial-up via 3G
  2.13  USB Bluetooth
  2.14  USB Disk, SD card
  2.15  Backlight Control
  2.16  Serial Port
  2.17  LED Testing
  2.18  PWM Buzzer
  2.19  ADC Testing
  2.20  I2C-EEPROM
5. Board Introduce
  5.1  Different in Tiny210/Tiny210V2
 
HDMI output
Board Support: Tiny210,Tiny210V2,Mini210S

Android System

HDMI Ouput

Link the Board HDMI(Type C) interface to TV with HDMI Cable, The Board can synchronize the output on the screen to the TV, if you play the video, the sound will sync output to the TV.
 
The format of the HDMI output can be set, you can set it as follow:
Press Menu(K2) and click "Setting" to enter the Setting menu interface, choose "Disply" menu.
You can set the Resolution from 480p to 1080p with the "TV Resolution" menu.

HDMI Output without LCD

You can update the system with the follow param in the friendlyARM.ini file, then it can support more HDMI resolution output.
More update the system moethod, please refer to the chapter 2.
#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action = Install
OS =Android
LCD-Mode = No
LCD-Type = HDMI720P60
CheckCRC32=No
StatusType = Beeper | LED

################### Android 4.0.3####################
Android-BootLoader = Superboot210.bin  
Android-Kernel = Android/zImage 
Android-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc androidboot.console= ttySAC0 skipcali=y 
Android-RootFs-InstallImage = Android/rootfs_android - mlc2 .img  
It can support the follow param for the LCD resoulution.
LCD-Type     Resolution   TV Resolution   HDMI1080P60  1920x1080  1920x1080   HDMI1080I60  1920x1080  1920x1080   HDMI1080P30  1920x1080  1920x1080   HDMI1080P60D  960x536  1920x1080  Andorid4 not support HDMI1080I60D  960x536  1920x1080  Andorid4 not support HDMI1080P30D  960x536  1920x1080  Andorid4 not support HDMI720P60    1280x720  1280x720   HDMI720P60D   640x360  1280x720   HDMI576P16X9  720x576  720x576   HDMI576P16X9D  720x576  720x576   HDMI576P4X3    720x576  720x576   HDMI576P4X3D  720x576  720x576 HDMI480P16X9  720x480  720x480 Andorid4 not support HDMI480P16X9D  720x480 720x480 Andorid4 not support HDMI480P4X3  720x480  720x480 Andorid4 not support HDMI480P4X3D  720x480 720x480 Andorid4 not support

HD Video play

Put the HD Video to TF-card(video support mp4, and audio suppot aac format). Then open ES File Brower, find your video file in TF-card.

Linux System

Output HDMI to TV 

It is turned on the HDMI output to the TV in Linux system by default, turn on the TV and plug in the HDMI cable, the image will be synchronized output to the LCD and TV. 
With HDMI, we can output image to the TV (or monitor)directly but no need to connect LCD.TV is not with touch screen,so you need to modify FriendlyARM.ini ,  add skipcali = yes behind the Linux-Command Line value to skip the touch screen calibration, and then operate by USB mouse.
If you want to turn off the HDMI output, or update the HDMI resolution, ,click the icon of the HDMI in the "friendly arm" program group,enter the HDMI setup program, cancel the setup program "Auto the start the HDMI-output on the boot", select the resolution in the list you want to set,then click Save. 
 
HDMI settings are in settings file: / root / Settings/HDMI.conf .User can pre-configure it before production.
[HDMISetting] AutoStart = yes
Resolution = 720P-60Hz
SupportResolution1=720P-60Hz
SupportResolution2=1080I-50Hz … 
AutoStart is whether synchronized output HDMI after booting (default value is yes). Resolution is HDMI resolution,Optional values are as follows  
1080P-60Hz
1080P-50Hz
1080I-60Hz
1080I-50Hz
720P-60Hz
720P-50Hz
576P-50Hz-16:9
576P-50Hz-4:3
480P-60Hz-16:9
480P-60Hz-4:3 
SupportResolution1 ~ SupportResolutionN is the values written by the back-platform service,and return the resolution connected TV successfully  .
HDMI  back-platform service is hdmi-service, it start by calling hdmi-service autostart. in the /etc/init.d/rcS

HDMI Output without LCD

You can update the system with the follow param in the friendlyARM.ini file, then it can support more HDMI resolution output.
More update the system moethod, please refer to the chapter 2.
#This line cannot be removed. by FriendlyARM(www.arm9.net)

CheckOneButton=No
Action = Install
OS =Linux
LCD-Mode = No
LCD-Type = HDMI720P60
LowFormat = Yes
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper | LED

################### Linux ####################
Linux-BootLoader = Superboot210.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock4 console=ttySAC0,115200 init=/linuxrc skipcali=yes
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4.img
It can support the follow param for the LCD resoulution.
LCD-Type     Resolution   TV Resolution  
HDMI1080P60  1920x1080  1920x1080  
HDMI1080I60  1920x1080  1920x1080  
HDMI1080P30  1920x1080  1920x1080  
HDMI1080P60D  960x536  1920x1080  Andorid4 not support
HDMI1080I60D  960x536  1920x1080  Andorid4 not support
HDMI1080P30D  960x536  1920x1080  Andorid4 not support
HDMI720P60    1280x720  1280x720  
HDMI720P60D   640x360  1280x720  
HDMI576P16X9  720x576  720x576  
HDMI576P16X9D  720x576  720x576  
HDMI576P4X3    720x576  720x576  
HDMI576P4X3D  720x576  720x576
HDMI480P16X9  720x480  720x480 Andorid4 not support
HDMI480P16X9D  720x480 720x480 Andorid4 not support
HDMI480P4X3  720x480  720x480 Andorid4 not support
HDMI480P4X3D  720x480 720x480 Andorid4 not support

WinCE System

HDMI sync output to TV 

connect Tiny210 board to TV or monitor by HDMI cable, WinCE image and sound will synchronize output to TV or monitor automatically , as shown below: 
To set HDMI output resolution and scaling parameters,oppen the  "friendly Arm" program group on the desktop,double click "HDMISetting",the setting windows as shown below:
In the setup program, you can set : 
1)Double Size  is used to set whether scaling output the double size image  , otherwise it is 1:1 size output the image. 
2) set HDMI resolution.There are 8 resolution available.
 Cancel "HDMI Enabled" and click Apply to close HDMI booting sync output.

 

  Tel: +86-755-29638421  |    Sales Email: market@armdevs.com |  Support Email: support@armdevs.com | Gtalk: armdevs@gmail.com  
www.armdevs.com | Copyright @2012 - CoreWind Technology Co.,Limited