Home Products Support Service Forum Order Contact Us CoreWind Technology
The User Manul for Mini210/Tiny210SDK1/SDK2 Board
1. Quickly Start
  1.1  Getting Start for Mini210s
  1.2  Getting Start for Tiny210
  1.3  System Update for Mini210s
  1.4  System Update for Tiny210
2. System Test method
  2.1  Touchsreen
  2.2  rotating screen
  2.3  Play MP3
  2.4  Recording
  2.5  WiFi Internet
  2.6  CMOS camera
  2.7  HDMI output
  2.8  GPS Test
  2.9  Ethenet Setting
  2.10  3G Networking
  2.11  3G SMS
  2.12  Dial-up via 3G
  2.13  USB Bluetooth
  2.14  USB Disk, SD card
  2.15  Backlight Control
  2.16  Serial Port
  2.17  LED Testing
  2.18  PWM Buzzer
  2.19  ADC Testing
  2.20  I2C-EEPROM
5. Board Introduce
  5.1  Different in Tiny210/Tiny210V2
GPS Test
Board Support: Tiny210,Tiny210V2,Mini210S

Android System

mini210s support GPS device(with serial port ) on android 2.3.4, the default device inode is /dev/s3c2410_serial1.
Link the GPS Device(serial port ) to the mini210s/Tiny210 board, the default inode for GPS is s3c2410_serial1(the interface on board is CON2:UART1), so connect the gps deveice to the CON2 on board
Then you can use the google map for the gps.
If you use the other interface GPS Device(such as the USB GPS device), you can use it by editing the init.rc file and add the follow word.
setprop ro.kernel.android.gps /dev/ttyUSB0

Linux System

Relased later..

WInce System

Relased later...
  Tel: +86-755-29638421  |    Sales Email: market@armdevs.com |  Support Email: support@armdevs.com | Gtalk: armdevs@gmail.com  
www.armdevs.com | Copyright @2012 - CoreWind Technology Co.,Limited