Home Products Support Service Forum Order Contact Us CoreWind Technology
The User Manul for Mini210/Tiny210SDK1/SDK2 Board
1. Quickly Start
  1.1  Getting Start for Mini210s
  1.2  Getting Start for Tiny210
  1.3  System Update for Mini210s
  1.4  System Update for Tiny210
2. System Test method
  2.1  Touchsreen
  2.2  rotating screen
  2.3  Play MP3
  2.4  Recording
  2.5  WiFi Internet
  2.6  CMOS camera
  2.7  HDMI output
  2.8  GPS Test
  2.9  Ethenet Setting
  2.10  3G Networking
  2.11  3G SMS
  2.12  Dial-up via 3G
  2.13  USB Bluetooth
  2.14  USB Disk, SD card
  2.15  Backlight Control
  2.16  Serial Port
  2.17  LED Testing
  2.18  PWM Buzzer
  2.19  ADC Testing
  2.20  I2C-EEPROM
5. Board Introduce
  5.1  Different in Tiny210/Tiny210V2
3G Networking
Board Support: Tiny210,Tiny210V2,Mini210S

Android system

We specially developed a 3G network utility for Android. It can automatically detect and support upto more than one hundred USB network cards for all these systems: WCDMA,  CDMA2000 and TD-SCDMA.
Our following example was tested with HUAWEI E1750 for WCDMA
Step1: Insert a SIM card into your USB card
Step2: Connect your USB card to the board and start the 3G utility
Step3: the 3G utility will detect the E1750 card. Click on its icon
Step4: in the dialog shown below there is an orange icon with a “-” in the center. This means no network is connected. Click on “Connect” to start connection
Step5: the connection process may take a while
Step6: if the connection is a success the orange icon will turn green and shows “Connected” and mean while FriendlyARM’s websites will be listed and a “3G” icon will show up in the upper left of the screen.
Step7 Click on the green icon you will see the current network information
Step8 choose the "3G Auto connection, and "Click on“Hide”to run it on background
Step9 try youku.com
Step10: to close the connection click on the “3G Network Status” icon to return to the main menu andclick on “Disconnect”

Linux System

There are three popular 3G systems WCDMA, CDMA2000 and TD-SCDMA. They require different 3G Modems. The most popular one is the USB 3G Modem, usually called “USB 3G network card” or “USB network card”. Our dial-up utility can detect and drive various USB network cards.
We will take HUAWEI E1750 as an example to show you how to use it.
Step1: please get a 3G SIM card ready
Step2£ºinsert the SIM card into the network card
Step3£ºplug the network card into your board
Step4: power on and start the 3G dial-up utility. It will automatically list all the detected signals. Click on “OK” to continue
Step5: click on “Connect” to start connecting. If the connection is successful it will show the following dialog
Step6: “Minimize” the dial-up utility, open a browser and you will be able to try surfing the internet!

Wince System

Released later...
  Tel: +86-755-29638421  |    Sales Email: market@armdevs.com |  Support Email: support@armdevs.com | Gtalk: armdevs@gmail.com  
www.armdevs.com | Copyright @2012 - CoreWind Technology Co.,Limited