Home Products Support Service Forum Order Contact Us CoreWind Technology
The User Manul for Mini210/Tiny210SDK1/SDK2 Board
1. Quickly Start
  1.1  Getting Start for Mini210s
  1.2  Getting Start for Tiny210
  1.3  System Update for Mini210s
  1.4  System Update for Tiny210
2. System Test method
  2.1  Touchsreen
  2.2  rotating screen
  2.3  Play MP3
  2.4  Recording
  2.5  WiFi Internet
  2.6  CMOS camera
  2.7  HDMI output
  2.8  GPS Test
  2.9  Ethenet Setting
  2.10  3G Networking
  2.11  3G SMS
  2.12  Dial-up via 3G
  2.13  USB Bluetooth
  2.14  USB Disk, SD card
  2.15  Backlight Control
  2.16  Serial Port
  2.17  LED Testing
  2.18  PWM Buzzer
  2.19  ADC Testing
  2.20  I2C-EEPROM
5. Board Introduce
  5.1  Different in Tiny210/Tiny210V2
USB Disk, SD card
Board Support: Mini210S

Android System

Android supports plug and play of USB flash drives up to a maximum of 32G (note: the drive should be formatted to FAT32).
1. Insert your drive to the USB host and a flash drive icon will apprear in the upper left of the screen.
2. Pull down the task bar on the top
3. Click on the drive icon
Click on “Umount USB mass storage” you will unmount your drive. Click on “Open folder brower” you can browse your files.

Linux System

Insert a common or high speed SD card (max memory 32G) or a USB flash stick, moments later a small icon will pop up on the lower right of the screen. The 210 board supports simultaneous mounting of the two. Click on the icon you will see the screenshot below, you can remove it safely like what you can do in Windows 
All files in the MMC/SD card or the flash drive can be viewed in the "Documents" tab. Their directories will not be displayed. 
Auto mounting of a MMC/SD card or a flash drive is developed by FriendlyARM based 
on a Qtopia 2.2.0 plugin. Now this function can only recognize the first section and can only recognize VFAT/FAT32/FAT16. 
Files of other formats may not be recognized correctly. 
Click on "Applications -> System Info -> Storage" you will view your SD card or flash drive’s detailed memory information: 

Wince system

In WinCE we can use use flash drives. After WinCE is booted insert a USB flash drive into the host socket, seconds later the drive will be automatically mounted. Double click on “My Device” and you will see it. Then you can enter it and operate your files. 
You can do it the same way for SD cards. Insert an SD card into the SD card socket and you will see it listed as “Storage Card”. Enter it and you will be able to operate your files. 
  Tel: +86-755-29638421  |    Sales Email: market@armdevs.com |  Support Email: support@armdevs.com | Gtalk: armdevs@gmail.com  
www.armdevs.com | Copyright @2012 - CoreWind Technology Co.,Limited