Home Products Support Service Forum Order Contact Us CoreWind Technology
The User Manul for Mini210/Tiny210SDK1/SDK2 Board
1. Quickly Start
  1.1  Getting Start for Mini210s
  1.2  Getting Start for Tiny210
  1.3  System Update for Mini210s
  1.4  System Update for Tiny210
2. System Test method
  2.1  Touchsreen
  2.2  rotating screen
  2.3  Play MP3
  2.4  Recording
  2.5  WiFi Internet
  2.6  CMOS camera
  2.7  HDMI output
  2.8  GPS Test
  2.9  Ethenet Setting
  2.10  3G Networking
  2.11  3G SMS
  2.12  Dial-up via 3G
  2.13  USB Bluetooth
  2.14  USB Disk, SD card
  2.15  Backlight Control
  2.16  Serial Port
  2.17  LED Testing
  2.18  PWM Buzzer
  2.19  ADC Testing
  2.20  I2C-EEPROM
5. Board Introduce
  5.1  Different in Tiny210/Tiny210V2
PWM Buzzer
Board Support: Mini210S

Android System

To test PWM, please click on the iTest icon

Click on “PWM Testing” you will see the following window
On the dialog, you can type a frequency and “start” or adjust the frequency by clicking on “+” and “-”.Tostopit you can click on “stop”.

Linux System

Go to the “FriendlyARM” tab and click on the “PWM/Buzzer Testing” icon to open the interface. By default, the output frequency of PWM is 1000Hz. Click on the “Start” button, the buzzer will beep. Clicking on the “+” or “-” button will change its frequency and sound as well. Clicking on the “Stop” button stops the buzzer

WinCE System

Go to “FriendlyARM”, click on “PWM-Buzzer” you will see the following dialog. Click on “Start” you can test its beeping. Click on “Stop” you can stop it. 

  Tel: +86-755-29638421  |    Sales Email: market@armdevs.com |  Support Email: support@armdevs.com | Gtalk: armdevs@gmail.com  
www.armdevs.com | Copyright @2012 - CoreWind Technology Co.,Limited