>> back to product pages!
  • The follow sheet is for the CORE9G25 board, the 2.6x and 3.1x row is only for the debian system.
  • If you want to know the Linux system inode define, click here to see linux inode define.. 
Pin # IC Pin Default Alt 2.6x 3.1x Note
N1   3V3       Power In Vcc
N2 PC0 GPIO SDA1 96 64 I2C bus 1 Data or GPIO
N3 PC1 GPIO SCL1 97 65 I2C bus 1 Clock or GPIO
N4 PC2 GPIO   98 66  
N5 PC3 GPIO   99 67  
N6 PC4 GPIO   100 68  
N7 PC5 GPIO   101 69  
N8 PC6 GPIO   102 70  
N9 PC7 GPIO   103 71  
N10 PC8 GPIO UTXD0 104 72  
N11 PC9 GPIO URXD0 105 73  
N12 PC10 GPIO   106 74  
N13 PC11 GPIO   107 75  
N14 PC12 GPIO   108 76  
N15 PC13 GPIO   109 77  
N16 PC14 GPIO   110 78  
N17 PC15 GPIO   111 79  
N18 PC16 GPIO UTXD1 112 80  
N19 PC17 GPIO URXD1 113 81  
N20 PC18 GPIO PWM0 114 82 GPIO or Pulse Wave Modulation Out 0
N21 PC19 GPIO PWM1 115 83 GPIO or Pulse Wave Modulation Out 1
N22 PC20 GPIO PWM2 116 84 GPIO or Pulse Wave Modulation Out 2
N23 PC21 GPIO PWM3 117 85 GPIO or Pulse Wave Modulation Out 3
N24   GND       Power In GND
Pin # IC Pin Default Alt ID 2.6x ID 3.1x Note
E1   GND       Power In Vcc
E2 PC22 TXD3 GPIO 118 86 Serial line /dev/ttyS4 TXD or GPIO
E3 PC23 RXD3 GPIO 119 87 Serial line /dev/ttyS4 RXD or GPIO
E4 PC24 RTS3 GPIO 120 88 Serial line /dev/ttyS4 RTS or GPIO
E5 PC25 CTS3 GPIO 121 89 Serial line /dev/ttyS4 CTS or GPIO
E6 PC26 GPIO   122 90  
E7 PC27 RTS1 GPIO 123 91 Serial line /dev/ttyS2 RTS or GPIO
E8 PC28 CTS1 GPIO 124 92 Serial line /dev/ttyS2 CTS or GPIO
E9 PC29 GPIO   125 93  
E10 PC30 GPIO   126 94  
E11 PC31 GPIO   127 95  
E12 USBCP D+       USB 2.0 Host full-speed port C
E13 USBCN D-       USB 2.0 Host full-speed port C
E14   GND       Power In GND
E15 USBBN D-       USB 2.0 Host hi-speed port B
E16 USBBP D+       USB 2.0 Host hi-speed port B
E17   GND       Power In GND
E18 USBAN D-       USB 2.0 Host/Device hi-speed port A
E19 USBAP D+       USB 2.0 Host/Device hi-speed port A
E20 VBAT         RTC battery backup +3 volt DC input
E21 NRST         Reset input signal (active low)
E22 SHDN         Shutdown output signal (active low)
E23 WKUP         Wake-up input signal (active low)
E24   3V3       Power In Vcc
Pin # IC Pin Default Alt ID 2.6x ID 3.1x Note
S1   3V3       Power In Vcc
S2 PA21 1W GPIO 53 21 Bit banging 1-wire bus or GPIO
S3 PA20 DA3   52 20 microSD Card memory
S4 PA19 DA2   51 19 microSD Card memory
S5 PA18 DA1   50 18 microSD Card memory
S6 PA17 CK   49 17 microSD Card memory
S7 PA16 CDA   48 16 microSD Card memory
S8 PA15 DA0   47 15 microSD Card memory
S9 PA14 NPCS0 GPIO 46 14 SPI bus 0 chip select 0 or GPIO
S10 PA13 SPCK GPIO 45 13 SPI bus 0 clock or GPIO
S11 PA12 MOSI GPIO 44 12 SPI bus 0 Master Output or GPIO
S12 PA11 MISO GPIO 43 11 SPI bus 0 Master Input or GPIO
S13 PA10 DTXD   42 10 Debug serial port
S14 PA9 DRXD   41 9 Debug serial port
S15 PA8 RXD2 GPIO 40 8 Serial line /dev/ttyS3 RXD or GPIO
S16 PA7 TXD2 GPIO 39 7 Serial line /dev/ttyS3 TXD or GPIO
S17 PA6 RXD1 GPIO 38 6 Serial line /dev/ttyS2 RXD or GPIO
S18 PA5 TXD1 GPIO 37 5 Serial line /dev/ttyS2 TXD or GPIO
S19 PA4 GPIO   36 4  
S20 PA3 CTS0 GPIO 35 3 Serial line /dev/ttyS1 CTS or GPIO
S21 PA2 RTS0 GPIO 34 2 Serial line /dev/ttyS1 RTS or GPIO
S22 PA1 RXD0 GPIO 33 1 Serial line /dev/ttyS1 RXD or GPIO
S23 PA0 TXD0 GPIO 32 0 Serial line /dev/ttyS1 TXD or GPIO
S24   GND       Power In GND
Pin # IC Pin Default Alt ID 2.6x ID 3.1x Note
W1   GND       Power In GND
W2   ETHRXP       Eth RX+
W3   ETHRXN       Eth RX-
W4   ETHTXP       Eth TX+
W5   ETHTXN       Eth TX-
W6   ETH3V3       Eth 3V3
W7   ETHLED1       Eth Yellow led (traffic)
W8   ETHLED2       Eth Green led (link)
W9 PA22 GPIO   54 22  
W10 PA23 GPIO   55 23  
W11 PA24 GPIO   56 24  
W12 PA25 GPIO   57 25  
W13 PA26 GPIO   58 26  
W14 PA27 GPIO   59 27  
W15 PA28 GPIO   60 28  
W16 PA29 GPIO   61 29  
W17 PA30 SDA0 GPIO 62 30 I2C bus 0 Data or GPIO
W18 PA31 SCL0 GPIO 63 31 I2C bus 0 Clock or GPIO
W19 ADVREF         A/D converter voltage reference In (max 3.3 volt)
W20 PB11 AD0 GPIO 75 43 A/D converter Input 0 or GPIO
W21 PB12 AD1 GPIO 76 44 A/D converter Input 1 or GPIO
W22 PB13 AD2 GPIO 77 45 A/D converter Input 2 or GPIO
W23 PB14 AD3 GPIO 78 46 A/D converter Input 3 or GPIO
W24   3V3       Power In Vcc
Follow US: Facebook Google+ Twitter
Contact Us

About CoreWind

Founded in 2007, CoreWind is a leading supplier of system on modules (SOMs), development kits, and single board computers that enable customers to control costs, reduce risk, and speed time to market.
Our engineers are also enthusiastic about new projects and take pride in new designs that are on the cutting edge of the embedded marketplace...

Market Mail : market@armdevs.com
Support Mail: support@armdevs.com Sales Phone: +86-755-29638421


CoreWind Online Chat>
Work time: 09:00-18:00
Copyright @ 2014 to 2020 - CoreWind Tech.