This tutorial illustrates how to Recovery the pre-install system image by TF card.
Prepare
- Connect the Serial port to the PC(refer to the chapter "Debug Serial Port Interface")
- Confirm the CORE9X35 RAM 128MB or 256MB? (Different In 128MB and 256MB RAM)
Step-by-step guide
1. Prepare the TF card, Copy the follow recovery system image file to the TF card:
The follow recovery system image file position: Linux\image\SDrecovery\128MB_DDR2_RAM, Download the linux file from the here.
bootstarp file: boot.bin U-boot file: u-boot.bin logo File: logo.bmp Configure file: corewind.ini Recovery system file: Linux/usbupgrad_sam9X35ek.dt
If you use the 256MB DDR2 RAM verison, copy the Linux\image\SDrecovery\256MB_DDR2_RAM to the SD card.
2. Insert the TF card to the CORE9X25-CON board.
3. Power on the board, then the board will enter the system recovery mode, and recovery the system auto. when the Terminal print the follow info, it means update system success.
### Update OK ### Please RESET the board ###
4. Remove the TF card, and power on the board again.
