The IPC-SAM9G45-STN Industrial Computer is a high-performance controller board introduced by CoreWind. It is designed based on the CPU Module CM-SAM9G45 processor card which integrates an AT91SAM9G45 microcontroller, 128MByte DDR2 SDRAM, 256MByte Nand Flash, 4MB Dataflash, 2Kbit EEPROM, UART, Ethernet, USB HOST, LCD, Touch screen, RTC on board. It is connected with IPC-SAM9G45 expansion board through 200pin B-T-B expansion interfaces, The IPC-SAM9G45 expand 9 RS232 Serial port and 5 USB Host.

Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor 32kbytes Data Cache, 32kbytes Instruction Cache One 64kbyte internal SRAM and  ROM  Can work at up to 400MHz  Memory Devices SDRAM: 128MB DDR2 RAM NAND Flash: 256MB NAND Flash Data flash: 4MB Data flash EEPROM: 4kbit EEPROM TF Card: Support 32GB TF card RTC Function Integrated RTC chips with battle back up Mechanical  Dimensions: 132 * 151.6mm Power Input Voltage: 12V Temperature Range: -40 ℃ ~ 85 ℃ Humidity Range: 20% ~ 90%   Expansion Header Four 20-pin Connector for extend interface One 10-Pin Connector for Debug Serial port One 40-Pin Connector for LCD interface

9 x Serial Port(RS232) 4 x Serial port from CPU function 4 x Expand Serial Port from System Bus 1 x Debug Serial port  USB HOST/Device  Five High-speed USB 2.0 Host port, 480Mbps One high-speed USB OTG(Support USB Host/Device) TF-card  Support 32GB TF card  Display One 40-pin TFT-LCD interface with 4-wire  touch screen One 20Pin STN-LCD interface TFT LCD and STN-LCD can work on the same time  VGA-out Connector Integrated VGA chips  VGA DAC (high speed triple DACs), Support 800*600 General I/O 1 x System LED and 1 x Power LED 1 x Reset Button 4 x 4 Matrix keyboard interface 2 x SPI, 1 x IIC, 1 x PWM, 10 GPIO

SoftWare

Support Linux 2.6.30 System

CAN Bus 2.0 driver

LED driver

USB Host

NET: Ethernet, TCP/IP, Telnet

Serial port driver, RS485/RS232 Driver

VGA Driver, 800*600

Yaffs filesystem

Applications

Industrial control

Field Communication