The SOC-SAM9X25 is a System on Module aim at Industrial Automation Area based on Atmel 2012 newest AT91SAM9X25. With high-performance (up to 400MHz ARM ARM926EJ-S 32bit RISC Core,),   the SOC-SAM9X25 pins out all of the GPIO resources (including PA0-PA14, PA21-PA30, PB11-PB18, PC0-PC17, PD14-PD21 etc.) and industrial peripheral resources (CAN、ADC、UART,  USB+PHY、Soft Modem, Zigbee) by flexible Embedded Industrial Control Bus connector—PC104.Besides, The SOC-SAM9X25 integrate AT91SAM9x25, FLASH、DDR and Ethernet, which solves the most complex problem of connection between DDR and CPU so that customers can use AT91SAM9x25 easily、save the product development cycle dramatically and reduce the complexity and cost of the product effectively.

CPU: Atmel AT91SAM9X25

　　Up to 400MHz ARM ARM926EJ-S Core Microprocessor 

RAM: 128MByte DDR2

Flash: 256MB Nand Flash

LED: 1x power supply indicator and 1 x programmable indicator

EEPROM:1x 256KB I2C EEPROM

Power connector: 5V DC

NET: Two Ethenet interface, RJ45 connector

USB: 1x USB 2.0 Deveice interface

Debug: 1 RS232 Debug Serial port(2x5 Pin header)

UART: 1 TTL Serial Port(Support expand RS485 or RS232 voltage)

CAN: One CAN bus interface(TTL voltage)

PC104 connector 

Five Serial Port(TTL voltage)

Two CAN bus(TTL voltage)

Two USB Host

One Soft Modem

Four-channel 16-bit PWM and 12-channel 10-bit ADC

One Two-wire Interface(same as IIC) and Two SPI interface

One SSC bus(Synchronous Serial Controller)