| + | Atmel Series Board | ||||||
| + | Samsung Series Board | ||||||
|
|||||||
| + | CPU Modules | ||||||
| + | Embedded Module | ||||||
| + | Old Product | ||||||
Tiny210-S5PV210 | Samsung S5PV210 ARM Cortex-A8 Stamp Module
| Processor: | 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine |
|---|---|
| RAM Size: | 512MB DDR2 RAM, 32-bit data bus, 200 MHz |
| Nand Flash: | SLC NAND Flash: 512MB |
| Interface: | One Ethernet, USB Host, USB Device, TFT LCD, Touchscreen, HDMI, Micro SD card, Audio Out, EEPROM, SDIO WiFi, UART, RTC |
| System: | Android system, Linux system, Debian, WinCE system |
| Board size: | 180mm x 130mm |
|
$125
Buy Now
|
The Tiny210 Linux/Android System is a high-performance design based on the Samsung S5PV210 ARM Cortex-A8 microcontroller with 512MByte DDR2 RAM, 512MB Nand Flash, RTC, Audio and Ethernet capability. The system consists of a motherboard with the Tiny210 CPU module plugged into it, and an LCD touchscreen module mounted (three sizes available). The motherboard has integrated RS232, USB, Ethernet, Audio In/Out, Keyboard, LCD, HDMI, TV out, camera in, SDIO WiFi Module (pins only), SD card (pins only) and more other functions on board.
A complete software development package is included. The board supports Linux 2.6.35, WinCE 6, Android 4.0 and Android 2.3 operating system and is provided with complete basic drivers. .
HardWare
CPU Module
1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine512MB DDR2 RAM, 32-bit data bus, 200 MHzSLC NAND Flash: 512MBTwo 60-pin and one 30-pin 2.0mm spaced DIP connectors for mounting to motherboard51-pin 1.0mm spaced SMD connector for the LCDHDMI interfaceFour user LEDs (green)Power LED (red)Supply voltage from 2V to 6VCPU module dimensions: 64 × 50 × 11 mmSoftware: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7Mother board
We provide one mother board for Tiny210 CPU board.
One is for Tiny210SDK mother board, it have more expand fundtion, such as 4 USB Host, and so on.
| Interface define | Tiny210SDK1 Mother board |
| USB Host | Four USB Host: standard USB Host port |
| USB Slave | One USB Slave |
| Serial Port | Four serial port: two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level |
| Keys | Eight User keys |
| Ethernet | One RJ45 Ethernet port: DM9000AEP, 10/100M adaptive |
| Audio In/Out | One Audio In, One Audio Out, using the WM8960 |
| ADC Input | Six ADC input |
| Buzzer | One, control by the PWM0 |
| EEPROM | One, AT24C08 (256 Byte) for I2C test |
| LCD Interface | Four LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" full color TFT display LCD Another one is for 45Pin LCD interface |
| capacitance Touchscreen interface | Support, in the 45Pin LCD interface |
| SDIO interface | used to connect the SD WiFi module and other |
| CMOS Camera interface | used to connect CMOS camera Module |
| RTC Clock | with a backup battery |
| G-Sensor | G-Sensor support |
| Mini-PCIe | Mini-PCIe support, expand 3G module |
| PCB layer | Two layer |
| AV in | AV in support |
| PCB Size | 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module |
| Power Supply | DV-5V |
SoftWare
The board ships with Linux 2.6.28 BSP, WinCE BSP, and Android 2.3 source code, as well as an Android 4.0 test demo.
Android
Bootloader
Version: Superboot-210Function: Supports boot and system update by microSD/TF-card (Superboot)Linux kernel
Version: Linux-2.6.35Compile: arm-linux-gcc-4.5.1-v6-vfpAndroid system
Android 2.3 (source code)Android 4.0 (source code)Device Driver
TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, KeyboardWiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driverFile System support
Ubi filesystem, yaffs, ext2/3Function use examples
Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI supportCMOS Camera support, 3G support (WCDMA, CDMA2000)USB Disk support, USB Bluetooth support, Switch horizontal and vertical screenDynamic WallpapersLinux
Bootloader
Version: Superboot-210Function: Support boot and system update via microSD/TF-card (Superboot)Linux kernel
Verison: Linux-2.6.35Compile: arm-linux-gcc-4.5.1-v6-vfpDevice Driver
TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, KeyboardWiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driverFile System support
Ubi filesystem, yaffs, ext2/3Graphics system
Qtopia-2.2.0/Qt-4.4.3/Qt-4.7WinCE 6.0
Bootloader
Version: Stepldr and EBOOT (source code provided)Function: Supports download and system update via SD and USB-QuickbootWinCE NK
Version: WinCE 6.0 R3Function: HIVE register support, BINFS support, SLEEPDevice Drivers
TFT LCD/Touchscreen (supports 3.5", 4.3", 7.0", 8.0", 10.4" LCD)CMOS camera, user key driver, PWM driver, RTC driver, DM9000 driverSD card support, touch screen support, audio in/outSerial driver, media support (JPEG, FIMC, MFC, 2D/3D, TVENC,TVSCALER)WiFi, GPS, GPRS, CameraUSB Bluetooth, USB WiFi, USB mouse, USB key, IE6 explorerTest programs
LED test, button test, serial debug tools, PWM test, TV test, OpenGL testCMOS camera test, SD WiFi test, USB WiFi test, backlight control test, USB Bluetooth test, Ethernet test
