Tiny210V2-S5PV210 | S5PV210 ARM Cortex-A8 Board
Processor: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
RAM Size: 512MB DDR2 RAM, 32-bit data bus, 200 MHz
Nand Flash: SLC NAND Flash: 512MB
Interface: One Ethernet, USB Host, USB Device, TFT LCD, Touchscreen, HDMI, Micro SD card, Audio Out, EEPROM, SDIO WiFi, UART, RTC 
System: Android system, Linux system, Debian, WinCE system
Board size: 180mm x 130mm

$119    Buy Now

Notice: For the new version Tiny210V2SDK 1305, it will use the new name Smart210.

The Tiny210V2SDK is a high-performance design based on the Samsung S5PV210 ARM Cortex-A8 microcontroller with 512MByte DDR2 RAM, 2GByte Nand Flash, RTC, Audio and Ethernet capability. The system consists of a motherboard with the CM-Tiny210V2 CPU module plugged into it, and an LCD touchscreen module mounted (three sizes available). The motherboard has integrated RS232, USB, Ethernet, Audio In/Out, Keyboard, LCD, HDMI, TV out, camera in, SDIO WiFi Module (pins only), SD card, G-Sensor and more other functions on board.

A complete software development package is included. The board supports Linux 2.6.35 Android 4.0 and Android 2.3 operating system and is provided with complete basic drivers.  

HardWare

CPU Module-CM-Tiny210V2 CPU module
  • 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
  • 512MB DDR2 RAM, 32-bit data bus, 200 MHz
  • SLC NAND Flash: 512MB
  • Two 60-pin and two 30-pin 2.0mm spaced DIP connectors for mounting to motherboard
  • Ethernet Chip: DM9000AEP
  • Audio Codec Chip: WM8960
  • Four user LEDs (green)
  • Supply voltage from 2V to 6V
  • CPU module dimensions: 74x 55 x 11mm
  • Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
Mother board

We provide the Tiny210V2SDK mother board(new version: Tiny210V2 SDK 1301, For old verison, click here) for CM-Tiny210V2 CPU board.

 

  • Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
  • keys: 8 key
  • RJ45 Ethernet port: using DM9000AEP(On CPU board), 10/100M adaptive
  • Audio input and output: using the WM8960 professional audio chip(On cpu board), containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
  • USB Slave: 1 Road, the USB 2.0 specification
  • USB Host: Four USB Host Interface
  • Buzzer: 1, control by the PWM0
  • EEPROM: AT24C08 (256 Byte) for I2C test
  • LCD Interface: 2 LCD interface, support 3.5 "-19" full color TFT display LCD
  • Capacitive touch screen: I2C-based interface, on the 45Pin LCD connector
  • Resistive touch screen: 1-wired Touchscreen interface, On 40Pin LCD connector
  • SDIO interface: used to connect the SD WiFi module and other
  • CMOS Camera interface: used to connect CMOS camera
  • RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
  • MIPI-DSI interface
  • G-sensor Support
  • PCB layer: 2
  • PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
  • Power supply: DC-5V

SoftWare

The board ships with Linux 2.6.28 BSP, WinCE BSP, and Android 2.3 Android 4.0 source code.
Android
Bootloader
Version: Superboot-210
Function: Supports boot and system update by microSD/TF-card (Superboot)
 
Linux kernel
Linux-2.6.35 For Android 2.3
Linux-3.0.8 for Android 4.0 
Compile: arm-linux-gcc-4.5.1-v6-vfp
 
Android system
Android 2.3 (source code)
Android 4.0 (source code)
 
Device Driver
TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard
WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver
 
File System support
Ubi filesystem, yaffs, ext2/3
 
Function use examples
Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support
CMOS Camera support, 3G support (WCDMA, CDMA2000)
USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen
Dynamic Wallpapers
Linux
Bootloader
Version: Superboot-210
Function: Support boot and system update via microSD/TF-card (Superboot)
 
Linux kernel
Verison: Linux-2.6.35
Compile: arm-linux-gcc-4.5.1-v6-vfp
 
Device Driver
TFT LCD/Touchscreen, HDMI, Audio Out, MMC/SD card, Net, Serial port, Watchdog, RTC, Keyboard
WiFi, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver
 
File System support
Ubi filesystem, yaffs, ext2/3
 
Graphics system
Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
WinCE 6.0
Bootloader
Version: Stepldr and EBOOT (source code provided)
Function: Supports download and system update via SD and USB-Quickboot
 
WinCE NK
Version: WinCE 6.0 R3
Function: HIVE register support, BINFS support, SLEEP
 
Device Drivers
TFT LCD/Touchscreen (supports 3.5", 4.3", 7.0", 8.0", 10.4" LCD)
CMOS camera, user key driver, PWM driver, RTC driver, DM9000 driver
SD card support, touch screen support, audio in/out
Serial driver, media support (JPEG, FIMC, MFC, 2D/3D, TVENC,TVSCALER)
WiFi, GPS, GPRS, Camera
USB Bluetooth, USB WiFi, USB mouse, USB key, IE6 explorer
 
Test programs
LED test, button test, serial debug tools, PWM test, TV test, OpenGL test
CMOS camera test, SD WiFi test, USB WiFi test, backlight control test, USB Bluetooth test, Ethernet test

Market Mail : market@armdevs.com
Support Mail: support@armdevs.com Sales Phone: +86-755-29638421


CoreWind Online Chat>
Work time: 09:00-18:00
Copyright @ 2014 to 2020 - CoreWind Tech.